Jayshree Switchgears Private Limited

• Approved : The product has been thoroughly tested and approved by
1. Electrical Research and Development Association, (ERDA)-Baroda AS PER = IEC-309-1=1988.
2. Government of Gujarat L.D. College of Engineering (Department of electrical engineering) AHMEDABAD AS-PER=IS-4160=1967.
• Plugs and sockets are designed to overcome all short comings of the conventional type of plugs and sockets.
• Having silver tipped, spring loaded, self wiping, butt type contacts.
• Reasonably low contact resistance assuring negligible temperature rise.
• Spring loaded terminals are capable of holding copper as well as aluminium conductors under pressure.
• No possibility of loose contacts or connections arising out of vibrations, continuous heating etc.
• All metal parts are earth connected.
• Negligible voltage drop occurs when it is operated at rated current.
• Non deteriorating contact carrying surface.
• Reliability and durability of silver contacts assured against temperature rise.
• The easy inter changeability of interiors enables many different arrangement and therefore plugs and sockets can be used on 1-ph and 3-ph power supply.

• Robust construction, non ignitiable materials used, highly resistive to water and non-corrossive against humidity..
• The socket is fitted with a strong spring closed gasketted cover making the unit suitable for outdoor use.
• The plug can not be pulled out of the socket by its cable or fall out due to positive bayonet type fitting.
• Suitability of providing the socket on conduit box.
• Plugs and sockets have butt type contacts where the contact pressure is parallet to the forces required to insert and remove the plug.
• As contact force is directly opposite to that required to insert the plug. the contact pressure springs assist the removal of plug from the socket.
• Clearances and creep age of live contacts are more than 3 mm.
• Screws in metal or in insulation can be tightened and loosened repeatedly without damaging the threadings.
• Sockets are available for panel mounting as well as for wall mounting.
• Plugs are available with inclined handle as well as with straight handle.
• All mechanical parts are tested and approved by ERDA Baroda and Govt. of Guj., Ahmedabad.

Plug & Socket for use on power circuits
2P + E
1P+E+N
3P + E
3P+E+N
500V AC & DC
30 A (Copper cable)
20 A (Al.cable)
Less than 1 milli Ohm 1.2 kg (min.)
1.35 kg (max.)
10.000 operations 3/4"dia
6 mm2
Spring loaded

Specification and Features

• Conforms to IEC60309
• Type & Rating Current (Ie): DS1( 16A) DS3( 32A) DS6( 63A) DS9 (125A)
• IP Category : IP65
• Integral switching device which eliminates cumbersome interlocked switch socket outlets
• Live contacts are not accessible
• Built in Interlocking
• A safety lid cover for socket
• Safety disc / socket shutter provides dead front
• Self aligning & wiping contacts
• Silver tipped butt type contacts

Metal clad switches and sockets are constructed from heavy gauge and durable materials, which makes them ideal for high traffic commercial and industrial environments where impact damage may occur. This can include factories and workshops as well as sheds and garages where decorative styles would not be suitable
Get the best price for Metal Clad Plugs Socket

Specification and Features

• Conforms to IEC60309
• Type & Rating Current (Ie): DS1( 16A) DS3( 32A) DS6( 63A) DS9 (125A)
• IP Category : IP65
• Integral switching device which eliminates cumbersome interlocked switch socket outlets
• Live contacts are not accessible
• Built in Interlocking
• A safety lid cover for socket
• Safety disc / socket shutter provides dead front
• Self aligning & wiping contacts
• Silver tipped butt type contacts